The safety of vehicles can be complex as there are different categories of vehicles and different jobs that they do. There is also consideration of their design as new and how they are used and looked after throughout their life. This section is intended to provide road safety professionals, transport authorities, and road users with a basic understanding of some of the key elements relating to safe vehicles and how they link with other components in the Safe System.
This section has been structured to align with the classification used by Euro NCAP for vehicle technologies. This uses the following categories:
Safe driving: This is the minutes and hours before a collision. It relates to systems and behaviours that help the driver to avoid getting into a critical situation where emergency avoidance action is required. In this section, there are specific pages on:
Crash avoidance: This is the stage seconds before a collision, where safe driving has failed and a critical situation has occurred. Unless at least one road user takes emergency avoidance action, one or more impacts will occur. Systems active in this stage aim to urgently alert the driver, improve the effectiveness of avoidance action, or intervene on behalf of the driver. This section specifically outlines:
Crash protection: This is the milliseconds for which an actual impact lasts. In this phase of a collision, crash avoidance has failed and an impact is taking place. Measures in this phase of the crash are aimed at protecting the road users involved and minimising the severity of injuries caused. This section covers:
Post-Crash: This relates to the time after the impact has finished, primarily a period known as the ‘golden hour’ where the prognosis for a casualty can depend strongly on the time taken to receive the correct medical care.
There are also specific pages introducing the following broader elements:
The difference between Information, warning and intervention systems
The impact of vehicle weight and size
Various methods of implementation, in particular the role of regulation and market forces
More specifically, vehicle technology implementation in fleets
Other Terminology
Road safety practitioners investigating more details in vehicle safety are also likely to encounter some of these additional definitions:
Primary safety – Features that help to avoid collisions
Secondary safety – Features that help to minimise the severity of injury during the collision
Tertiary safety – Features that help to minimise the consequences of injury and maximise survival chances and recovery
And
Active safety – systems that change their state or characteristics based on the circumstances
Passive safety – systems that have just one fixed set of characteristics, always the same
These definitions are different but sometimes used interchangeably (active=primary or passive=secondary). However, technically, a mirror on a vehicle is actually a primary safety system (for helping the driver to prevent a collision) that is passive (its characteristics are always the same). Similarly, an airbag is a secondary safety system (it is intended to protect you during an impact) that is active (it is stored in the steering wheel until a crash is detected, then it inflates and expands to support the head and body). In practice, these terms are not well understood or accurately used.
With thanks to Apollo Vehicle Safety for their contribution to this content.
