Urban Speeds - Junctions

Prev Next
This content is currently unavailable in English (UK). You are viewing the default (English) version.

Implications for Delivery

When considering urban speeds at junctions it is important practitioners consider:

  • Junctions are high-risk conflict points – managing vehicle speeds here is critical to reducing crash severity and ensuring all road users feel safe.

  • Different speed measures matter – operating speed (free-flow), impact speed, and closing speed all influence collision risk and severity.

  • Guidance from roundabouts can apply more widely – using the lowest approach speed as the circulatory speed could inform broader junction design.

  • Design can control speed without new limits – tighter junction radii, reduced turning space, central islands, and raised side-road entries all help lower speeds and protect vulnerable road users.

  • Side-impact crashes dominate at junctions – survivable speeds are low; research suggests side-impact thresholds as low as 15 mph (25 km/h) depending on vehicle types.

Background

Speed control is critical at intersections where differential speeds, modes and traffic flows converge. Consideration should be given to how best manage these environments in a way that provides equitable experiences of safety at junctions with all users feeling adequately protected.

Junctions are natural conflict points, locations where traffic (motorised and non-motorised) travelling in a least two different directions converge. Managing traffic movements, including vehicle speeds at these points is critical in reducing risk and providing equitable experiences of safety.

It is worth considering the different categories of speed that influence a collision severity.

  • Operating speeds – the speed at which traffic travels in free-flowing conditions

  • Impact speed – the speed of the vehicle in the direction in which impact occurs

  • Closing speed – the relative speed between two colliding vehicles e.g sum of two vehicles’ impact speeds in event of a head-on collision

Guidance for setting local speed limits at roundabouts currently states the circulatory should adopt the same speed limit as the arm with the lowest speed limit. Similar guidance is not given for other types of junctions, but it is worth considering this principle beyond just roundabouts.

Speed control can be achieved at junctions by other means than speed limits. Reducing junction radii and closing down on excess turning space through junctions can force drivers to navigate manoeuvres more slowly.

Using central islands can help differentiate between opposing vehicle paths.

Raised carriageway profiles can help to highlight the presence of VRUs crossing a side road and reiterate the Highway Code hierarchy of users.

What the Research Shows

Research studies into survivable speeds have considered different collision types. Typically at junctions the most frequent collision type is a side impact. Rizzi et al. (2023) recommended side impact speeds from 15 mph (25km/h), depending on the vehicles involved.

Sources

Rizzi, M., Boström, O., Fredriksson, R., Kullgren, A., Lubbe, N., Strandroth, J., & Tingvall, C. (2023). Proposed speed limits for the 2030 motor vehicle (Paper No. 23-0166). The 27th International Technical Conference on the Enhanced Safety of Vehicles (ESV), Yokohama. Available at: https://www.researchgate.net/publication/369905901_Proposed_Speed_Limits_for_the_2030_Motor_Vehicle.